Skip to content

Kisae - Inverter 3000 Watt Pure Sine with Transfer Switch and 100 Amp Charger - BIC1230100

$849.99

KISAE's newest release is the Bi-Directional series of Inverter Chargers.  The BIC123100 packs a 3000 Watt Inverter and a 100 Amp AC charger into one unit.  What, you might ask, is special about a 3000W / 100A Inverter Charger?  This unit was developed from the ground up to combine the charging hardware and the inverting hardware onto one PCB (mother board) inside the unit.  Traditional construction wired separate inverter and charger boards inside one housing.  This Bi-Directional construction method has resulted in a more robust unit, which can provide pure sine inverting and 100 Amps smart charging all at a very attractive price point.  

Features And Benefits

  • High wattage power inverter • True sine wave output
  • 120Vac output versions available
  • 230Vac output versions available
  • High amperage battery charger
  • Micro-processor controlled
  • Regulatory Approved to cETus standards for North America, and CE standards for EU, UK, AU and NZ
  • Multi-stage charging algorithm
  • Charges a variety of battery types
  • Lightweight compact design
  • Built-in CAN BUS communication
  • Accepts AC or DC input sources
  • Built-in load sense to minimize battery drain
  • Comes with remote panel included for unit setting and monitoring

Dimensions (L x W x H):

BIC1230100: 19.7” × 12.1“ × 4.2” (500mm x 307mm x 106mm)

Weight:

BIC1230100: 22.9 lbs. / 10.4 Kg

 

AC Output Power (Continuous) 3000W
AC Output Power (Peak – 1 second) 6000W
AC Output Voltage/Frequency 120VAC / 60 Hz
AC Output Current 25.0A
AC Output Current (Peak) 50A max (with max power limitation)
AC Output Waveform True Sinewave (<5% THD)
Peak Efficiency 90%
Input Voltage (nominal) 12.5Vdc
Input Voltage Operation Range 10.5 – 16.5Vdc
Inverter Standby Current <3.0A
Input Standby Current (Power Save) < 0.6A
Charger Voltage Range 13.8 – 14.8V (Selectable)
Float Voltage Range 13.0 – 14.0V (Selectable)
Charger Current 25 – 100A
Charger Battery Type Gel, Flooded, AGM, Lithium, Programmable, Power Supply
Charging Stages Check, Bulk, Absorption, Float, Recharge
Recharge Voltage Range 12.8 – 14.0 V (Selectable)
Recharge Timer 7-days (Automatic)
Power Sharing Reduce Charger Current when heavy AC Load is connected
AC Input Voltage/Frequency 120 VAC (Accept MSW AC Input)
AC Input Voltage Acceptance Range: 108 – 132 VAC
Transfer Time < 30ms
Transfer Relay Rating 30A
AC Input Port Hardwire 30A Heavy Duty Connector
AC Output Port Hardwire 30A Heavy Duty Connector
AC Input Socket NEMA 5-20 GFCI or Hardwired
Battery Input Undervoltage Shutdown: 10.5 – 12.0Vdc (with dynamic control)
Battery Input Undervoltage Warning: 11.0 – 12.5Vdc
Battery Input Undervoltage Recovery: 11.5 – 13.0Vdc
Battery Input Overvoltage Shutdown: 16.5Vdc
Inverter Overload Warning/Shutdown: 2800W / 3300W
Unit Over-temp Warning/Shutdown: Yes
Power On/O Switch Yes (Push Button)
Indicator 3 LEDs (Power, AC Output, Unit Status)
Remote Display Port For Remote Display Panel use
Battery Temperature Sensor Port: For use with Battery Temperature Sensor (BTT)
Ignition Start Port For use with Vehicle ‘ACC’ signal
Indicator (LED) Power, AC Output, Unit and Battery Status
Display Type LCD with backlighting
Numerical Display Function Battery Voltage, AC Power, DC Current
Graphics Display Function AC Bypass, Battery Power, AC Input, Battery Status Warning/Fault Code
Communication CAN BUS, Bluetooth (optional)
USB Port Unit software upgrade
Markings cETLus
Conformance UL & CSA Standards
EMI/EMC FCC Part 15 Class B
Dimensions (L x W x H) 19.7” × 12.1“ × 4.2” (500mm x 307mm x 106mm)
Net Weight 22.9 lbs. / 10.4 Kg